The Interactive Hemodynamics Visualization & Analysis System enables an interactive experimental study of hemodynamics using state of the art technologies. Explore the highly visual nature of fluid flow using many standard or custom blood vessel models and heart valves interactively and safely with Patented Interactive Experiment and user friendly FLOWEX™ software which integrates Educational Computer Aided Design (CAD), Computational Fluid Dynamics (CFD), and Particle Image Velocimetry (PIV).Interactive Flow Experiment and FLOWEX™ software are used as tutors and they serve to increase basic skills and knowledge of hemodynamcis.
Standard models – Three blood vessel phantoms, based on real patient data demonstrating various degrees of stenosis, come with the system. – A mitral mechanical tilting disc heart valve comes as standard. Bestech Australia also provide test equipment for hospitals such as 60 Hertz Impedance Tester, Ground Integrity Tester, Digital Interval Timber, Plugs & Jacks, Ground & Power Outlets, Grounding Cord Sets, and etc. - Dental Milling Blocks : Wax, PMMA, Zirconia, Chrome Cobalt and Titanium
- Diameter for discs : 98mm / 98.5mm / 99mm
- Thickness range : 10 mm / 12 mm / 14 mm / 16 mm / 18 mm / 20 mm / 22 mm / 25 mm
- Indications : Coping, single crown, full contour crowns, long span bridges and implant abutment
Due to its maximum temperature of 1650 °C, LHT 02/17 LB Speed is perfectly suited for sintering of translucent zirconia. The electrically driven lift-bottom provides for easy charging. The heating all around the cylindrical furnace chamber provides for a good temperature uniformly.
By using special heating elements made of molydenum disilicide, crowns and bridges are protected against chemical contamination at the best. The charge will be placed in saggars made of technical ceramics. Up to three saggars on top of each other guarantee high productivity.
Model LHT 02/17 LB Speed is additionally equipped with rapid cooling devices. The furnace automatically opens stepwise for faster cooling. Depending on the charge and the type of saggars process times shorter than two hours can be realized.
