The HT from X-Sight is a high-temperature optical extensometer for non-contact strain measurement on specimens tested inside a furnace. It measures strain from ambient temperature up to 1800 °C, so tensile, compression and cyclic tests at elevated temperature can run without exposing a contact extensometer to the heat. The HT also suits any test that needs precise measurement over a small field of view, including work outside a furnace.
The HT combines a telecentric lens with a 5 MPx camera and auto-switching monochromatic light, viewing a 47 × 41 mm field of view from a working distance of 262 mm. Alpha DIC software tracks the specimen surface by digital image correlation (DIC) and reports strain over one or several selectable gauge lengths, with axial and radial neck detection. Sampling runs at 75 to 200 Hz, and the extensometer connects to the PC over USB 3.0.
The HT is classified to ISO 9513 Class 0.5 and to ASTM E83 Class A for gauge lengths above 15 mm. As hot air moving at the furnace opening can distort the image and register as false strain, an optional AirLock optical tunnel seals the gap between the extensometer and the furnace to steady the view. Bestech Australia supplies the HT, backed by technical support from application engineers.
Enquire Now
Key Features
- Temperature range: Ambient to 1800 °C
- Accuracy class: ISO 9513 Class 0.5; ASTM E83 Class A (gauge length above 15 mm)
- Field of view: 47 × 41 mm at 262 mm working distance
- Camera: 5 MPx, 75 Hz at full resolution; sampling 75 to 200 Hz
- Lens and interface: Telecentric lens; USB 3.0
Applications and Case Studies
- Tensile and compression testing inside a furnace
- High-temperature uniaxial cyclic tensile testing of steel
- Precise strain measurement over a small field of view




