Melt Pressure
Melt Pressure Transducers (MPT) are based on strain gauge technology and formed with a full Wheatstone bridge circuit. Melt pressure transducer fills the high temperature application gap (≧400°C) at where other pressure sensors would possibly fail, e.g. plastics extrusion, injection and blow moulding industries. MPT has high degree of accuracy, stability and repeatability at high operation temperature and is ideal for extruder melt pressure measurements.
Pressure range | 0bar to 2000Bar |
Overload pressure | 150% F.S.O |
Max Temperature at wetted parts | 400°C |
Output options | 3.33mV/V (strain gage) 0-5V DC, 0-10V DC, 4-20mA (amplified) |
Process Connection | external thread 1/2″-20 UNF-2A, M14x1.5, M18x1.5 |
Custom / special design | Available |
Media | melting liquid, acids, alkaline, sewerage, chemicals, foods, etc. |
Repeatability | 0.2% F.S.O |
Accuracy* | ±0.3%, ±0.5%, ±1 %F.S.O |
Measuring range | 0-2000 bar |
Accuracy | ±0.3…±1% F.S. |
Output options | 4-20mA; 0-5V/0-10V; mV/V outputs |
Connectors | Wide range of process & Electrical connection |
*combined error
Melt pressure transducer using Piezoresistive strain gauge technology can convert medium pressure into an electrical signal output. Instead of using conventional transmission line filled with mercury or special types of oil, pressure values are transmitted mechanically via a rigid stem which is attached to the sensing element using a Wheatstone bridge circuit formed by 4 strain gauges on a micro-machined silicon structure in the sensor.
Melt Pressure Transducers with flexible extension stem and mounted manometers are available for selection. Melt pressure transmitters offer a wide range from 0/10 bar to 0/2000bar with high accuracy up to 0.3%F.S. and 150% overload pressure capabilities.
Bestech Australia provides comprehensive range of products for pressure, level, flow, integrated pressure-temperature measurements. Covering a wide variety of scopes and specifications, customers can easily find the right solutions for applications by choosing from our wide range of standard pressure measurement instruments as well as custom-designed or OEM applications.
Highlights:
- Both rigid stem and flexible extension provide thermal isolation to electronics
- Simultaneous pressure and temperature measurement at single point
- Rigid compact design
- Internal shunt calibration signal of 80%FS no need of external calibration pressure
- Hastelloy® -C membrane available
- 100% stainless steel with special alloy coating on pressure diaphragm
Please complete the enquiry form below for specific information and advice on Melt Pressure.
Fields marked with a '*' are mandatory and must be filled.