Pressure transducers convert pressure applied on the sensing element into an electrical signal. There are many types of pressure transducer using various technologies such as bonded foil, thin/thick film, semiconductor strain gauge and etc. When connect to an appropriate power supply, pressure transducers output a typical millivolt electrical signal that varies with charges in undertaken pressures. Our pressure transducers have good linearity, stability and frequency response performances. There are also pressure transducers without compensation electronics such as pressure capsules that mostly used in OEM applications. Pressure transducers are robust and small in size, ideal for applications where short electrical connections are required. Since pressure transducers have no electronics components, they cannot be upset by electromagnetic interference. High voltage output pressure sensors incorporate zero & span adjustment potentiometers can be easily calibrated.
|Pressure range||0 to 4000bar|
|Temperature range||-40°C to +260°C|
|Output options||10mV to 300 mV|
|Process Connection||any male or female ISO, BSPT, NPT, etc. connection|
|IP protection rating||IP65, IP67, IP68 or others|
|Explosion proof option||Available|
|Custom / special design||Available|
|Media||Water, gas, flammable liquids, acids, alkaline, sewerage, chemicals, foods, etc.|
|Pressure Reference||Absolute, vented pressure, sealed gauge, differential|
|Frequency Response||up to 1MHz|
|Accuracy*||±0.01%, ±0. 1%, ±0.25%, ±0.5% of FS or others|
|Measuring range||0-4000 bar|
|Accuracy||± 0.01%…± 0.5% F.S.|
|Output options||10…600 mV mV/V outputs|
|Connectors||Wide range of process & Electrical connection|
*includes: Non-linearity,Hysteresis and Non-repeatability
- Pressure capsules;
- Low cost models;
- Digital pressure gauges;
- Digital manometers;
- Pressure films;
- Fibre sensing for pressure measurement.
For more details, please CONTACT US with your application details.
Please complete the enquiry form below for specific information and advice on Pressure Transducer.
Fields marked with a '*' are mandatory and must be filled.