Static torque transducers based on strain gauge technology are designed to measure the torque of non-rotating parts. Static torque sensors are used in applications where in-line torque measurement is required while angular motion is limited.
Furthermore, the combination of torque sensors and DIN standard couplings corresponds to power density and market requirements that ensure the long-lasting high performance of the torque sensor. Next to various keyway hubs, tension rings and clamping hubs, a flange connection and 6 different shaft-hub-connections are available. Reaction torque transducers ranging from 0.005-20,000 Nm with high accuracy and excellent temperature stability are the right choice for static torque measurement.
|Products||Measuring ranges||Accuracy Class||Range of Application||Mechanical Connection|
|D-2452*||0.005-20000 Nm||0.05%-0.1%||e.g. Extruder||Cylindrical shaft|
|DK-15||1-100 Nm||0.1%-0.2%||e.g.Test Stands||Cylindrical shaft with Keyway|
|DV-14||2-5000 Nm||0.1%-0.2%||Survey of assembly tools for screws and nuts||Male/Female square drive|
|D-2431||0.2-20 Nm||0.1%||Survey of assembly tools for screws and nuts||¼” Hexagon Drive / Quick Change Chuck|
|DH-15||0.005-20 Nm||0.1%-0.2%||For very small ranges||Flange with Spigot / Cylindrical Shaft|
|DFW-25||5-2000 Nm||0.1%-0.2%||Compact design||Flange with Center Hole / Cylindrical Shaft with Keyway|
|DFW-35||2-2000 Nm||0.1%-0.2%||Survey of assembly tools for screws and nuts||Flange with Center Hole / Square|
|D-2223||2-5000 Nm||0.1%-02%||Survey of assembly tools for screws and nuts||Flange with Center Hole / Square Socket|
|D-2209||1-5 Nm||0.2%||Compact design||Flange with Spigot|
|D-2553||10-200 Nm||0.1%||Compact design||Flange with large through Hole and Centre counter bore|
|DF-30||10-20000 Nm||0.05%-0.1%||Compact design||Flange with centre hole|
|D-2268||100-5000 Nm||0.1%||Short design||Flange|
|Accuracy||± 0.05%…± 0.2% F.S.|
|Mechanical Connection||Cylindrical shaft;
Male/Female square drive;
¼” Hexagon drive/quick change chuck;
Flange with centre hole/square socket;
Flange with spigot/cylindrical shaft
The basic principle of static torque sensors or torque transducers is using strain gauges applied to a stationary axle to measure a force or torque that has been put on in turning or attempting to turn the shaft. The strain caused by applied torque in the material of the shaft can be measured using strain gauges technologies and hereby, torque is calculated and valued. Meanwhile, strain gauges are widely recognized as one of the most reliable methods of measuring the torsion in a shaft.
For more details pleases visit here.
For more information, CONTACT US now with your application details.
Please complete the enquiry form below for specific information and advice on Static.
Fields marked with a '*' are mandatory and must be filled.