Bestech Australia - Measurement and Control Instrumentation

TSE merges with Bestech Australia

TSE (Technical & Scientific Equipment) has combined its operations with those of Bestech Australia Pty Ltd, in order to achieve operational synergies and to offer an even better level of support to our customers. The two companies specialise in sensors, instrumentation, environmental and test equipment. All staff will continue with the business, and all products will continue to be supported.

Technical & Scientific Equipment has a team of engineers to service the Australian and New Zealand market since 1969. TSE offers in house manufacturing and some of the best brands in the world for scientific & environmental testing. TSE has expertise in leak testing, Package Seal testing, Materials testing equipment for tensile, compression, fatigue, impact & hardness testing, Water & odour analysis, data acquisition force, torque and pressure measurement. Please visit www.techsci.com.au for the new products now available to you.

We look forward to the opportunity to continue to work with you. All our details continue to be the same.

Laser Displacement Sensor

OptoNCDT 1700

Laser triangulation sensors of Micro-Epsilon fulfill the customer requests for a very wide range of applications.

Special advantages of the optoNCDT1700 are:

- It is the most high performanced triangulator in its class(best cost-performance ratio)

- 4 Measuring ranges from 10 mm ? 100 mm (further ranges in development)

- Compact design with integral electronics

- Real-time surface compensation: fastest adaptation to changing surfaces

- Configuration and control via software PC (Windows)

- Exposure Control: measurement frequency can be reduced if longer exposure time is required (dark or shining objects - 312 Hz ? 2,5 kHz)

- Synchronization of two sensors for differential- or thickness measurements

- Analog output: 4 ? 20 mA and 0 ? 10 V, digital via RS 422 or USB

So the laser optical displacement sensor optoNCDT1700 is the ideal enhancement for our optical sensor product portfolio.

Typical applications:

- Gaging, displacement, position

- Deflection, tilt, vibration

- Dimensions, dimensional tolerance, thickness

- Dynamic part profiling, part recognition

- Quality inspection off- and online

The optoNCDT 1700 can be used in nearly every industrial sector like R & D, test, factory- and machinery automation.

Spring-Loaded DC-LVDTs Offer Consistent Measurement in Harsh Dimensional Gaging Applications

Radial-Mounted Sealed Connector Reduces Installed Length

Macro Sensors, a manufacturer of LVDTs, RVDTs and related instrumentation, offers a line of rugged, spring-loaded DC-operated LVDTs for dimensional or position measurement in automotive factories, forges and foundries (large shaft TIR measurements), metal fabricating shops, paper and/or plastic film plants, industrial process automation applications and all types of motion control systems.

Constructed entirely of stainless steel, the GHSDR 750 series use built-in electronics for a DC input/output operation. Electronics and coil windings are hermetically sealed against hostile environments to IEC standard IP-68. The rugged construction of the GHSDR series permits operation in harsh industrial environments such as shop floors where dirt, oil, water and machine coolants may be present. Electrical termination is made through a radically-mounted sealed connector that permits a much shorter installed length.

The GHSDR 750 series offer three desirable features not typically found with comparable gaging-probe type position sensors:

The through-bore design allows for air purging of the sensor's bearings to remove any potential contaminants.
By locating the connector radically, the overall installed lengh of the LVDTs has been greatly shortened allowing for use in locations with space restrictions.
A detachable mating connector, supplied with every unit, permits repair or replacement of damaged or severed cables without the need to replace the entire LVDT, as with units having integral cables.

The GHSDR 750 units exhibit excellent performance with repeability of 0.000025 inches or better, and maximum linearity error of (+-)0.25% of full range output. Units are available in standard measurement ranges of (+-)0.050, (+-)0.125, (+-)0.250, (+-)0.500, (+-)1.00 and (+-)2.00 inches. Special versions of the GHSDR 750 series of spring-loaded LVDTs can be provided for demanding or unusual applications such as nuclear radiation environments. Liquid tight electrical terminations can be easily added to standard units.

Operating from a (+-)15V DC input, these position sensors provide a pre-calibrated 0 to (+-)10V DC outout that works in conjunction with many PLCs, digital indicators, A/D converters, computer-based data processors, and QC data collection systems. Macro Sensors manufactures a full line of support electronics for these LVDTs including OEM modules, DIN-rail mount line-powered and DC-operated signal conditioners and digital display and control instruments.